This 36W UV resin kit provides everything needed to begin creating small jewelry, charms, keychains, and decorative molded items. The package pairs two 100g bottles of crystal clear UV epoxy with a 36W lamp that has 22 LEDs, plus basic accessories to simplify the workflow. The formula is low viscosity and designed to cure into a hard, glossy finish that resists yellowing.
What’s included
- Two 100g bottles of hard type UV resin (200g total)
- 36W UV lamp equipped with 22 LED beads
- Silicone mat to protect your workspace
- Mixing cups and sticks for measuring and blending
- Disposable gloves to help keep hands clean
Key features explained
Hard type, low viscosity formula
The resin is a hard type that reaches a Shore 85D hardness after curing. Its low viscosity (about 2000 cps) helps the liquid flow into detailed bezels and molds, reducing the chance of trapped air. With less than 2% shrinkage, the cured pieces maintain shape and detail.
Crystal clear and non-yellowing finish
The formula is designed to cure to a glass-like, high-gloss surface that resists yellowing over time. This makes it suitable for embedding items such as dried florals, glitter, pigments, and small charms where long-term clarity is important.
36W lamp with 22 LEDs
The included lamp delivers 36 watts of power across 22 LED beads. It is sized for small projects and is intended to fully cure tiny resin pieces in roughly 1–3 minutes when used as recommended. The lamp and resin are supplied together so you can begin crafting without additional purchases.
Practical step-by-step use guidance
- Prepare your workspace. Lay the silicone mat down to protect surfaces and keep tools organized.
- Measure and mix. Use the included cups and sticks to combine or measure any additives, pigments, or inclusions before adding resin to a mold or bezel.
- Pour carefully. Pour the low-viscosity resin into molds or bezels to ensure it reaches fine details. The fluid consistency helps it flow and settle.
- Cure under the lamp. Place the filled mold or piece under the 36W lamp. Small projects typically cure in about 1–3 minutes under the provided light.
- Finish and demold. Once cured to a hard, glossy finish, remove parts from molds and trim or sand as needed for final shaping or assembly.
Key features in context
- Shore 85D hardness: Provides a rigid, durable surface suitable for jewelry and small decorative items.
- Low viscosity: Easier pouring into tight cavities and detailed molds, which can reduce air entrapment.
- Low shrinkage: Maintains dimensional accuracy, which is useful when precise fit or edge detail matters.
- Non-yellowing clarity: Preserves embedded elements and colorants so pieces remain bright over time.
- Included lamp: Fast curing for small parts, enabling quicker project turnaround compared with ambient cure resins.
Best projects and suitability
This kit is aimed at makers working on small-scale items. Typical uses include:
- Handmade jewelry such as pendants and earrings
- Keychains and zipper pulls
- Small molded decorations and charms
- Embedding fine inclusions like glitter, tiny charms, and dried flowers
Because of the compact lamp and the 200g resin supply, the kit suits hobbyists, beginners, and crafters exploring resin before committing to larger quantities or industrial equipment.
Limitations to consider
- The lamp and resin are optimized for small projects; large pours may require longer cure times or multiple passes and are not covered by any included testing data.
- The supplied resin quantity is 200g total. For larger runs or multiple layered pieces, additional resin will be necessary.
- Accessories included are basic. Users seeking professional finishing tools or advanced mold release agents will need to source those separately.
Safety notes
The kit includes disposable gloves to help protect hands during mixing and pouring. Use those gloves to limit skin contact with uncured resin. Follow any lamp operating instructions provided and avoid looking directly into the lamp while it is powered on. Take care to work on the supplied silicone mat or another protected surface to prevent accidental damage.
Quick tips for better results
- Work in thin layers to help the lamp cure evenly and to reduce internal stress.
- Mix inclusions thoroughly before pouring to avoid clumping or settling.
- Allow pieces to fully reach room temperature before demolding for cleaner edges.
Conclusion
This 36W UV resin kit delivers a compact, entry-level solution for makers who want a fast-curing resin and a lamp that matches small jewelry and charm projects. The low-viscosity, hard-type formula offers a high-gloss finish with minimal shrinkage and a non-yellowing profile for long-term clarity. The kit includes basic tools to get started quickly, while more ambitious or higher-volume work will require additional supplies. Listed price is USD 9.99; prices may change.